Introduction to the production line process and su

  • Detail

The mill production line is composed of crushing equipment, hoister, silo, feeder and mill

production line process of pulverizer: after the bulk material is crushed to the required particle size by jaw crusher, the static load of the material is sent to the silo by the elevator, and then it is sent to the main machine grinding room evenly, quantitatively and continuously by the vibrating feeder for grinding, and the ground particles are taken away by the air flow of the fan. After classification by the analyzer, the powder conforming to the fineness flows through the pipeline into the large cyclone collector with the gas for separation and collection, and then is discharged through the powder pipe, which is the finished powder. The air flow is then sucked into the blower by the return air pipe at the upper end of the cyclone collector. The whole air flow system of this machine is closed and circulates under positive and negative pressure

the operation process sequence of the pulverizer production line: Start: hoist → crusher → analyze how many are the benign development machines of all industries that will be infringed after all → fan → host → feeder. That is, start the dustpan elevator → start the jaw crusher in traditional chemical products → start the analyzer after there is material in the silo → start the blower (start with no load, and control the operation essentials before loading after normal operation → start the host, and immediately start the electromagnetic vibration feeder at the moment of starting the host. At this time, the grinding work begins. (end)

Copyright © 2011 JIN SHI